CipherLab Co. Ltd. 9700 Manuale Utente

116

9700 Mobile Computer (CE) 

Reference Manual

By default, BT-Connect will automatically re-connect to the previous services the next time 
the mobile computer goes through a Bluetooth power cycle. The preferred devices and 
services will also be reflected on the Preference tabbed page of 

BT Manager

.

This section explains the statuses of previously connected devices/services and their 
re-connection settings.   

Tap the Device tabbed page in BT-Connect to check the statuses of previously connected 
devices.

The device has been paired with (

) and at least one 

service has been re-connected successfully, such as 
Headset/Handsfree, HID, PAN, or SPP. 

Last Connection = Y

(on the 

Preference Tab

)

The device has been paired with (

) but have the 

following settings for remote services, such as 
Headset/Handsfree, HID, PAN, or SPP: 

(1) Last Connection is set as N, meaning none of the 

services are required to be re-connected. 

(2) Last Connection is set as Y, but the device fails to be 

re-connected.

Last Connection = N or Y

(on the 

Preference Tab

)

The device is not paired, yet it has services which do not 
require PIN code exchange and are set as not to be 
re-connected (such as DUN, FTP, or OPP). 

Last Connection = N

(on the 

Preference Tab

)

Note:  The re-connection settings are configurable via 

BT Manager

. If you want to remove 

a specific device from the device list, you have to manually delete records of all its 
Bluetooth services on the 

Preference Tab

.