CipherLab Co. Ltd. 9700 Manuale Utente

133

 Chapter 4 Manage Mobile Computer

6

th

 Keypad 

0: 

None 

3: Numeric (30-key) 
4: Numeric & Function   
   (38-key) 
5: Alphanumeric 
   (53-key) 
6: Alphanumeric 
   (53-key) 
7: Alphanumeric 
   (53-key) 

7

th

 LCD 

0: 

None 

3: QVGA 

8

th

-- N/A 

9

th

-- N/A 

10

th

Touch panel 

0: None 
1: 3.5” QVGA 
   Transflective 

11

th

-- N/A 

Logs onto a Windows Terminal Server or a remote computer through remote desktop 
connection. You may then access all programs, files and network resources on the 
remote host or terminal server. 

SNTP tabbed page: Synchronizes the mobile computer’s time with an NTP server 
either automatically or manually. Users can also select the time period for 
auto-sychronization. Synchronized time will be written to RTC and system time will 
be updated. 

Check Internet connection status if the following synchronization status shows: 
“Cannot get time information through SNTP”. 

Note: For auto-synchronization to function properly, Time Synchronization 

application should be shut down. Close the application when you are finished 
adjusting the settings. 

Sets the type of USB connection without re-plugging the USB cable.   

ActiveSync Serial Mode: Sets up ActiveSync connection with PC through serial 
protocol. This is the default setting.

Mass Storage – SD Card: Presents the mobile computer with an SD card installed 
as a storage device. If no SD card is installed, the directory on the PC will be blank.

Note: Selection of ActiveSync Advanced Network Mode or ActiveSync Serial Mode will 

be synchronized with settings under Start | Settings | Control Panel | USB to 
PC.