CipherLab Co. Ltd. M0010 Manuale Utente

48

Terminal 

Reference Manual

Tap 

 or 

  to close an active window, a dialog box, or a running application. If 

the button is not displayed on the toolbar, press 

  on the physical keypad.   

Tap 

  to save the current settings and exit the application (or minimize the 

window in some applications). If the button is not displayed on the toolbar, press 

  on the physical keypad. 

Note:  Some programs, such as the Reader Configuration Utility (94ReaderCfg.exe), 

may create an associated icon on the taskbar. You may tap the icon and 
select [Exit] from the pop-up menu. 

Reset the mobile computer when it stops responding to input. 

Software Reset: Simply press the [Reset] button. 

Hardware Reset: Press the [Reset] button and 

  at the same time. 

Warning: 

Never perform a hardware reset unless a software reset cannot solve 
your problems. 

A software reset, also known as a warm boot, will restart the mobile computer and 
keep all the saved files. To perform a software reset, use the stylus to press the [Reset] 
button.  

During operation, the removal of main battery will start a software reset too. 

Warning: 

Data loss may occur when files are not properly closed before a 

software reset. 

A hardware reset, also known as a cold boot, will restart the mobile computer too. 
However, it performs a full restore of the mobile computer to its factory settings and 

initializes SDRAM. To perform a hardware reset, press 

  and [Reset] button at the 

same time. Data and program files stored in SDRAM will be erased after a hardware 
reset. But you can restore data that is previously synchronized with your computer by 
performing an ActiveSync operation.