NEC 2600-lumen Portable Projector NP-M260X Manuale Utente

Codici prodotto
NP-M260X
Pagina di 4
DESIGNED WITH THE ENVIRONMENT IN MIND
° Extended lamp life with ECO Mode™ technology increases lamp life up to 6000 hours, while lowering power consumption
° Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
° Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
° Carbon savings meter calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
   message at startup. A green ECO Mode button on the remote control makes the switch easy. 
° Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power off with 
   no cooling required after shutdown) ensures efficient energy usage 
° Sleep timer can be set to automatically turn off the projector at set countdown times
° Low power consumption (0.2W in stand-by mode) minimizes energy costs 
ADVANCED SOFTWARE FEATURES
6000-hour filter life
NEC is committed to 
designing its products to 
provide long lifecycles. 
This commitment even 
extends to components 
within its products, 
including the improved 
filter. This virtually 
maintenance-free filter 
reduces the frequency 
at which cleaning 
is required, thereby 
decreasing your total 
cost of ownership.
Active lens cover
This cover enables presenters to immediately mute 
the audio and video, then seconds later lower the 
lamp brightness to 25% for a short period of time.
Geometric Correction
Projecting an image isn’t confined to 
a standard flat screen or wall with the 
NEC M Series. Geometric correction al-
lows these models to project an image 
on spheres, cylinders, corner angles 
and many more non-standard surfaces.
Cornerstone
 
Enhanced keystone correction allows for horizontal, vertical and diagonal image 
correction for aligned images even when the projector is set up at an angle to the 
screen.
Virtual Remote™ (DDC/CI) 
Used over the VGA cable, you can control the projector 
directly from a computer without the need for additional 
control cables.