Iridium Satellite LLC 9523N Manuale Utente
Iridium Communications, Inc. Information Contained in this Guide
Iridium Core 9523/9523N Product Developer’s Guide is Subject to Change Without Notice
Revision 7.2 DRAFT4
Iridium Communications, Inc.
Distribution of Guide Restricted
Proprietary & Confidential Information Page 3 of 34 to Product Developers
Only
Only
applicable terms and conditions of such agreement(s), including without limitation software
license, warranty, conditions of use and confidentiality provisions.
license, warranty, conditions of use and confidentiality provisions.
Export Compliance Information
This Product is controlled by the export laws and regulations of the United States of America. The U.S.
Government may restrict the export or re-export of this Product to certain individuals and/or destinations.
Diversion contrary to U.S. law is prohibited. For further information, contact the U.S. Department of
Commerce, Bureau of Industry and Security or visit
Government may restrict the export or re-export of this Product to certain individuals and/or destinations.
Diversion contrary to U.S. law is prohibited. For further information, contact the U.S. Department of
Commerce, Bureau of Industry and Security or visit
Revision History
Revision
Date
Comment
1.0
Nov 11, 2015
First Draft.
2.0
May 9, 2011
Second Draft Following Internal Review
2.3
Jul 26, 2011
Revision sent with Alpha prototype Developer’s Kit
2.5
Sep 12, 2011
Revision sent with Beta prototype Developer’s Kit
2.6
Oct 11, 2011
- Added FCC and IC warning statements (sections 1.3 and 1.4)
- Removed reference to mounting screws in sect
- Removed reference to mounting screws in sect
ion 2.1 “Dimensions
and Layout”
-
-
Clarified screw/hole specifications in section 2.2 “Field Application
Board Mounting”
- Unified formatting of examples and removed references to AT*Rn in
section 8 “Informative Examples”
- Unified formatting of examples and removed references to AT*Rn in
section 8 “Informative Examples”
2.7
Oct 17, 2011
- Replaced refer
ence to AT*F with AT*P0 in section 3.2.3 “Power
On/Off Control”
-
-
Added note on digital I/O ESD protection in section 3.1.2 “User
Connector Pin Allocation”
3.0
Oct 21, 2011
First published revision
3.1
Oct 27, 2011
Added note on non-portable regulatory certification to section 1.2
3.2
Feb 23, 2012
Significantly reduced sections "Data/Fax Port" and "AT Interface" and
added references to the ISU AT Command Reference. Removed
sections "S-Register Definitions", "Summary of Result Codes",
"Informative Examples", and "Supported AT Commands" as this
information is contained in the ISU AT Command Reference.
added references to the ISU AT Command Reference. Removed
sections "S-Register Definitions", "Summary of Result Codes",
"Informative Examples", and "Supported AT Commands" as this
information is contained in the ISU AT Command Reference.
7.0
Aug 20, 2012
-
Updated section “Legal Disclaimer and Conditions of Use”.
-
Removed description of PCB digital audio ports as “15 bits” in section
3.3 “PCM Digital Audio” since the ports use 16-bit PCM samples.
7.1
Jul 29, 2014
- Changed
all references to the product to “Iridium Core 9523”
- Corrected section 4 sub-section numbering
- Revised introductory paragraph of section 2.3.2
- Revised introductory paragraph of section 2.3.2
7.2
DRAFT2
Nov 17, 2015
Updated to include 9523N. For internal review.
Incorporated comments from Mike Senzig.
Incorporated comments from Mike Senzig.
7.2
DRAFT3
Jan 12, 2016
Updated in accordance with comments from the IEC 60950-1 safety
testing at TUV (see Interim Test Summary_75932207_Issue1):
Clarified part numbering in section 2.1. Clarified number of power
supplies and the nominal and maximum voltage and maximum current
in section 3.2.1 and included recommendation to incorporate a current
limiting device in the host application. Added details on requirements
of the enclosure provided by the host product/application in section 2.2.
Updated Declaration of Conformity.
testing at TUV (see Interim Test Summary_75932207_Issue1):
Clarified part numbering in section 2.1. Clarified number of power
supplies and the nominal and maximum voltage and maximum current
in section 3.2.1 and included recommendation to incorporate a current
limiting device in the host application. Added details on requirements
of the enclosure provided by the host product/application in section 2.2.
Updated Declaration of Conformity.
7.2
DRAFT4
Jan 28, 2016
Updated in accordance with comments from the IEC 60950-1 safety
testing at TUV (see Interim Test Summary_75932207_Issue2).
testing at TUV (see Interim Test Summary_75932207_Issue2).