ZTE Corporation A261 Manuale Utente

 

9 

„ 

Put the phone at a ventilated place with temperature between + 5℃ and + 40

. 

℃ Use only the supplied or 

approved chargers. Using unauthorized charger may cause danger and violate the authorization and warranty 

rules of the phone. 

„ 

Charge the battery in time when your phone automatically powers off or displays a warning “Battery low”.   

„ 

The talk time and standby time of the phone lie on ideal working environments. In practice, the battery working 

time varies with different network conditions, working environments and modes. 

T-flash Card 

ZTE A261 supports T-flash card. You can use T-flash card to expand the storage of the phone. You can store 

or copy files such as videos, photos, music, and so on. 

Inserting: The T-flash card slot is at the right of the phone. Open the cover. Insert the card with the metal 

contacts facing down until it clicks to the right position. 

Removing: Press and release the card to pop it out and then remove it. 

„ 

Do not take out the card or switch off the phone while transmitting or storing data, which may cause data loss or 

damage to the phone or the card. 

„ 

Do not touch the metal contacts on the card with hands or metal objects. Use a soft cloth to clean the card. 

„ 

Keep the card out of the reach of the children. 

Connecting to the Network 

Do not touch the metal contact area of the SIM card (Subscriber Identity Module card). Doing so may cause 

information in the card lost or destroyed. Keep the card away from electricity and magnetism.   

„ 

Switch off your phone, disconnect the outer power source and remove the battery. 

Warning: It is forbidden to insert or remove the SIM card when it is on or connected to an outer power source. 

„ 

Insert the SIM card into the SIM card slot or pull it out from the slot. When insert the SIM card into the slot, 

please insert the SIM card by aligning the metal contacts area of the SIM card with the metal contacts in the slot 

on the phone. 

 

Hold the End key to power on/off the phone. 

The mobile phone will automatically test whether the SIM card is plugged in and valid after power on, then the 

following messages will be displayed on the screen sequentially： 

Enter Phone Lock Code——if a phone lock code has been set.   

Enter PIN  ——if a SIM card password has been set.   

Searching  ——search for the right network. 

After the phone and the SIM card are unlocked, the mobile phone will automatically search for the network. After 

a few seconds, your phone will be registered on the network. Now your phone is in the standby mode. Besides 

receiving and sending calls, you can also do the following things: 

„ 

Press the Left soft key to enter the function menu. 

„ 

Press the Right soft key to enter the Name [Phone Book].