ZTE Corporation AC2766 Manuale Utente
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
ZTE Corporation
2 http://www.zte.com.cn
3. Appearance
3.1 Introduction
3.2 Insert R-UIM Card
Note: If your data terminal doesn’t need R-UIM card, please skip this section.
1. Take
1. Take
out
USB interface and R-UIM card cover in the direction indicated by the arrow.
2. Insert R-UIM card as below
3. Push back R-UIM card cover.
3.3 Operation Guide of Data Cable
Generally, the Data Terminal could be directly connected with USB port. You could also connect
the Data Terminal with PC by using the accompanying data cable, as shown in the following
figure. Connect Interface ① with Data Terminal, and interface ② with PC's USB port. If the
power supply from USB port is insufficient, connect both interface ② and ③ with USB port
together.
the Data Terminal with PC by using the accompanying data cable, as shown in the following
figure. Connect Interface ① with Data Terminal, and interface ② with PC's USB port. If the
power supply from USB port is insufficient, connect both interface ② and ③ with USB port
together.