ZTE Corporation E810 Manuale Utente

1 Getting Started

1.1 Starting Up

Install the SIM Card and Battery

1. Hold your SIM card with the cut corner oriented as shown below and then insert it into the card holder properly. See Figure 1.
2. Insert the battery by aligning the gold contacts on the battery with the gold contacts in the battery compartment on the phone. Push down the battery until it
clicks into place. See Figure 2.
3. Replace the battery cover and press it gently until you hear a click. See Figure 3.

Figure 1 Figure 2 Figure 3

Remove the Battery and SIM Card

1. Ensure that your mobile phone is switched off.
2. Remove the battery cover. See Figure 4.
3. Pull the battery up and remove it from the mobile phone. See Figure 5.
4. Pull the SIM card out and remove it from the mobile phone. See Figure 6.

Figure 4 Figure 5 Figure 6

Charge the Battery

The new battery is not fully charged. To charge the battery, you need to:
1. Open the cover of the adapter slot on the bottom of the phone. See Figure 7.
2. Connect the adapter to the adapter slot. See Figure 8.
3. Connect the charger to a standard AC wall outlet.
4. When charging in the power-off mode, the battery icon is flashing. When charging is completed, the battery icon stops flashing. When charging in the
power-on mode, the icon

appears

on the title bar of the Home screen. When charging is completed, the battery indicator

appears on the title bar.

5. Disconnect the charger when the battery is fully charged.

Figure 7 Figure 8