ZTE Corporation EUFI891 Manuale Utente

 

 

 

The security modes are described below: 
NONE:

 In this mode, no password is required. 

 The WLAN clients who have the same key with wireless gateway can pass the 

authentication and access the wireless network. 
WPA-PSK:

 WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII) pass-phrase 

of at least 8 characters. 
WPA2-PSK:

 A securer version of WPA with implementation of the 802.11i standard. 

 Apply both the WPA-PSK and WPA2-PSK scheme. 

If the Security type is WEP, the following configuration page will appear: 

 

 Two types of authentication can be used: OPEN and SHARE. In the 

 authentication type, the WLAN client (device) doesn't need to provide the correct 

credentials to the ZTE Unite in order to connect to it. However, if the credentials are incorrect, 
data won't be transferred successfully between the WLAN clients and ZTE Unite. In effect, no 
authentication occurs. And in the SHARE authentication type, the WLAN client cannot connect 
to the ZTE Unite with the incorrect crendentials. 
Encrypt Type:

 Select the encrypt type(WEP-40 and WEP-104). 

You can set at most four keys. Choose one of them as the default key, which is the 

only key in use at any given time. You must enter the default keys on the Wi-Fi client in order to 
connect to the ZTE Unite.

 

Select Wi-Fi Settings > ACL to access: