ZTE Corporation EUFI891 Manuale Utente

If you have not already done so, please follow these instructions for the installation of your new 

SIM Card which is in the package: 

1.

 

  Remove SIM Card from the outer card, being careful not to touch the gold contacts. 

2.

 

  Turn the power off. Remove the battery cover and take the battery out. Locate the SIM card 

slot. Hold the card so the writing on the back of the card is facing you and the gold contact 

points are properly aligned with the SIM Card slot.

 

 

                             

 

3.

 

 

Insert SIM Card into the slot until it is fully inserted.   

ATTENTION!   


    The SIM Card MUST remain in your ZTE Unite when in use. Once the SIM card has been 

inserted into the ZTE Unite, do not remove! 



    Do not bend or scratch your SIM Card. Avoid exposing your SIM Card to static electricity, 

water or dirt. 



    If your SIM card is separated from the ZTE Unite or damaged, your ZTE Unite will not 

work. If you encounter any issue with your ZTE Unite, contact Customer Service at 
1-888-944-9400 or visit your nearest U.S. Cellular

®

 retail location. 

1.

   Use the thumb catch at the bottom of your ZTE Unite to open the battery cover and align the 

battery contacts with the terminals in the battery compartment as shown. Push the battery 

down until it clicks into place. 

       

                           

 

2.   Place the battery cover over the battery compartment and press it downward until it clicks 

into place.