ZTE Corporation WP960 Manuale Utente

                                                   ZTE WP560/960B/BD User Manual 

 

No display on LCD after 
the FWP is powered on 

Check the status of power switch, quality and connection 
of adapter and battery, otherwise change power adapter 
or battery. 

No display on LCD after 
the FWP is powered on 
when its power is 
supplied by battery. 

Check if the battery is correctly installed, if the battery 
socket and plug are well connected, if the battery’s 
connection is broken or has welding problem, otherwise 
change the broken battery. 

Can’t make long distance 
calls 

Check if the long distance setting of the FWP is enabled, 
if enabled, please cancel this function according to the 
User Manual 

No indication of signal 
strength 

Change the antenna’s position; change the FWP’s place 
when the network signal is weak; set the power switch to 
“OFF” and then reset it to “ON” to check if the FWP 
starts normally. If it can’t start normally, please contact 
your seller. 

No dialing tone after the 
handset is picked up 

Hang up and pick up the handset again; check the 
connection between the phone and the handset. 

Can’t have internet 
access. 

First check to see if USB data line is in good connection, 
then operate according to the instructions in the disk. 
Power off the FWP and power it on. If internet access 
still fails, please contact your seller. 

Other abnormalities 

First read the User Manual, check the connection of 
power supply and antenna, if no abnormality is found, 
power off the FWP and power it on again. 

58