ZTE Corporation X767 Manuale Utente
"Charging completed" appears on the screen. During the
charging, the battery, mobile phone and charger may normally
become hot.
charging, the battery, mobile phone and charger may normally
become hot.
5.
Please disconnect the charger from your mobile phone and
the socket when the charging is completed.
the socket when the charging is completed.
Note:
Put your phone in ventilated place under normal
temperature during charging. Use the original charger
or those authenticated by the manufacturer. Using
non-original charger may cause danger and violate
the warranty provisions. Charge your mobile phone
in time when it is powered off automatically or
prompts the lack of the power.
temperature during charging. Use the original charger
or those authenticated by the manufacturer. Using
non-original charger may cause danger and violate
the warranty provisions. Charge your mobile phone
in time when it is powered off automatically or
prompts the lack of the power.
Insert and Remove UIM Card
Insert a valid UIM card into your mobile phone before use. All
information regarding network connection and UIM phone book
is saved in UIM card. In order to avoid the loss and damage of
information saved in UIM card, please don’t touch the metal
surface and put UIM card far away from electricity or magnetism.
information regarding network connection and UIM phone book
is saved in UIM card. In order to avoid the loss and damage of
information saved in UIM card, please don’t touch the metal
surface and put UIM card far away from electricity or magnetism.
1.
Turn off your mobile phone, remove the
battery and disconnect the external power.
battery and disconnect the external power.
2.
Put UIM card into the socket as shown in
the figure.
the figure.
3.
Turn off your mobile phone and remove the
battery before taking out UIM card.
battery before taking out UIM card.
Follow the converse steps to remove UIM card.