ZTE Corporation X990 Manuale Utente
錯誤! 使用 [常用] 索引標籤將 标题 1 套用到您想要在此處顯示的文字。
15
Charge the battery
The accompanying Li battery can be used after being unpacked. To make
the battery always in its best condition, please exhaust the capacity of the
battery and then fully recharge it for the first three times.
the battery always in its best condition, please exhaust the capacity of the
battery and then fully recharge it for the first three times.
1.
Connect the charger with the mobile phone through
the charging interface, and insert the charger to
110V/220V power socket.
the charging interface, and insert the charger to
110V/220V power socket.
2.
When the phone is powered on, the capacity indicator
on up-right corner of the screen keeps scrolling during charging; when
the phone is powered off, there
on up-right corner of the screen keeps scrolling during charging; when
the phone is powered off, there
‟ll be charging indication on the screen
during charging. If the phone is used excessively without enough
capability, the charging indicator will not immediately appear on the
screen of the phone when charging starts, and the phone might not be
powered on within a few minutes.
capability, the charging indicator will not immediately appear on the
screen of the phone when charging starts, and the phone might not be
powered on within a few minutes.
3.
When the phone is on, the battery is fully charged as the capacity
indicator on the up-
indicator on the up-
right corner of the screen is full and doesn‟t flicker
any longer. When the phone is off, the battery is fully charged as there
is charging indication on the screen during charging. During the
charging, the phone and charger may normally become hot.
is charging indication on the screen during charging. During the
charging, the phone and charger may normally become hot.
4.
Please disconnect the charger from your mobile phone and the socket
when the charging is completed
when the charging is completed
.