ZTE Corporation ZTE-TES25 Manuale Utente

 

4

 

Thank you for choosing TES25 WiMAX ExpressCard Modem (hereinafter referred to as “modem”). 
To guarantee your modem always in its best condition, please read this manual carefully and keep it for 

future use. 

The pictures, symbols and contents in this manual are just for your reference. They might not be 

completely identical with your modem. Please subject to the real object. ZTE operates a policy of continuous 
development and reserves the right to update and modify the technical specifications in this document at any 
time without prior notice. 

The modem is an applicable to WiMAX network. You can connect it to PC with Express interface. It 

integrates modulation and demodulation function and communication with the Internet perfectly. Via WiMAX 
network, it carries out data service and help you break away from limitation of time and zone, and 
communicate wirelessly anytime and anywhere.

 

  Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately 

shielded, such as electronic system of vehicles. Please consult the manufacturer of the device before 
using the modem if necessary. 

  Operating portable PC and modem may interfere with medical devices like hearing aids and pacemakers. 

Please always keep the modem more than 20 centimeters away from such medical devices when they are 
in use. Power off modem if it is necessary. Consult a physician or the manufacturer of the medical device 
before using the modem 

  Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical 

factories, where there are explosive gases or explosive products being processed. Do not use modem     
if necessary. 

  Do not use modem at gas station. 
  Store the modem out of the reach of small children. The modem may cause injury if used as a toy. 
  This modem cannot be used with handheld PDAs (personal digital assistants).   
  This modem and its antenna must not be co-located or operated in conjunction with any other antenna or 

transmitter. 

  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:   

(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 

  This modem generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. 

  There is no guarantee that interference will not occur in a particular installation. If this modem does cause 

harmful interference to radio or television reception, which can be determined by turning the modem off 
and on. 

 
RF exposure warning 
 

This equipment must be installed and operated in accordance with provided instructions and must not be 
co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must 
be provide with antenna installation instructions and transmitter operating conditions for satisfying RF 
exposure compliance. 

 

SAR Value: 1.398W/kg 

 

For a Class B digital device or peripheral, the instructions furnished the user shall include the following or 
similar statement, placed in a prominent location in the text of the manual: 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful