ZTE Corporation ZTEC88 Manuale Utente

Settings

Language

Your phone can display text in English or Spanish.  To change the language settings, select

Language from standby mode.  Changing the language settings changes all menus and message

settings.  Use the Up and Down keys to select between English and Spanish.  Press OK to select the highlighted

language.

Bluetooth

Your phone is capable of connecting to a variety of Bluetooth wireless accessories.  You may create and store 20

pairings within the phone and connect to one device at a time.  The approximate range for Bluetooth wireless technol-

ogy is up to 30 feet (10 meters).  Your phone has the following Bluetooth profiles:

HSP

Headset Profile

The HSP profile allows you to use

Bluetooth wireless headset

a Bluetooth wireless headset to

make calls with your phone.

HFP

Hands-free Profile

HFP allows you to connect with a HFP

Bluetooth hands-free car kit

enabled car-kit for hands-free conversations.

or other HFP-capable devices

OPP

Object Push Profile

OPP allows you to send phonebook entries

Bluetooth capable handset

(in v-card format) to other OPP-capable devices.

The Bluetooth menu allows you to search for Bluetooth wireless devices, and manage devices that have already been

paired with your phone.  To access the Bluetooth menu from standby mode, select Menu

Bluetooth.

Manage the Bluetooth settings below:
„ Power:  Enable or disable the Bluetooth support
„ Discovery Mode:  Disable or enable discovery mode for 60 seconds.  Turn discovery mode on for 60 seconds to

allow other devices to find your handset.
„ Device Name:  Set the Bluetooth device name for your phone.  This name will appear on other Bluetooth devices

when your phone is located.

„ Address:  Identifies the address for your handset
„ Device Type:  Shows your Bluetooth device type
„ Support Profiles:  Allows you to view a listing of the Bluetooth profiles supported by the handset.

This menu allows you to manage the Bluetooth device that have been, or currently are paired to your handset.

To pair with a new Bluetooth device from this menu:

1.

Press Search to find a new compatible device

2.

If Bluetooth power is set to off, you will be prompted to turn the power on.  Select OK to enable Bluetooth.

3.

The device will appear in the Bluetooth Device menu once it has been located.  Highlight the desired device

and press OK.

4.

The phone will prompt you for the pass key.  Consult the Bluetooth accessory instruction manual for the correct

pass key.  Enter the pass key and press the OK key.

5.

Once connected, you will see the device listed in the paired Devices menu, and the Bluetooth icon will appear

on the status bar.