ZTE Corporation ZTECS200 Manuale Utente

 

 

5. Pull the TFlash card completely out of the TFlash slot on the phone. 

 

 Tips:

 

 

•

 Do not remove the memory card while reading or writing to the card. Doing so may cause data 

corruption on the card or phone. If possible, insert and remove the memory card while the phone is 
powered off. 

 

•

 You’d better use your phone to format your TFlash card. If you want to format it on your PC, please 

select FAT Formatting type. Otherwise it might cause the memory card not identified by your phone. 

 

 

You can connect your headset to your phone to answer the call and listen to the music. You can also tie a 
wrist strap with your phone. 

Insert the headset to the Headset port. 

 

Plug the smaller end of the cable into the USB connection jack at the right side of the phone, and the 
bigger end into the USB port of the computer. 

 

Thread a strap and tighten it. 

 

 Notes:

 

Do not power on your phone if wireless phone use is unapproved, or when it may cause interference or 
danger. 

 

1. Press and hold End Key to turn the phone on 

 Tips:

 

 

f

 When being asked, enter your PIN (Personal Identification Number) code or phone code and press the 

OK Key to confirm. 

 

f

 The PIN code is the password provided by your network service provider. You need this password to 

use the UIM card. 

 

f

 When the entered PIN code or phone code is accepted, the phone will automatically search for the 

designated network. After a few seconds, your phone will show the standby mode. 

 

 

 

2. To power off the phone, press and hold the End Key from the standby mode. 

 

Your phone is powered by a rechargeable battery. The battery is not fully charged when first unpacked,