ZTE Corporation ZTECS268 Manuale Utente

 

 Caution: 

 

•

 Do not bend or scratch your UIM card. Keep the card away from electricity and magnetism. 

 

•

 Don’t touch the metal surface of the UIM card in case that information in the card may be lost or 

destroyed. 

 

•

 Make sure to disconnect the charger and other accessories from your phone and remove the battery 

before inserting and removing your UIM card. 

 

 

1. Press and hold the End Key to power off the phone. 

2. Slide down the battery cover and remove the battery. 

3. Insert the UIM card into the card holder, with the metal contacts facing downward and the cut corner in 

the right direction. Make sure it is pushed all the way to the end as shown below. 

 

 

 

4. Push the battery until it clicks into position. 

5. Place the battery cover onto the back of your phone. 

 Notes: 

 

f

 The charger and other accessories should be disconnected from your phone before you insert or 

remove the UIM card. 

 

f

 When inserting the UIM card, make sure that the metal contacts face downward and the cut corner is 

at the top left. 

 

 

1. Press and hold the End Key to power off the phone. 

2. Slide down the cover. 

3. Remove the battery. See Removing battery. 

4. Remove UIM card gently from the card holder. 

 

 Notes: 

 

•

 The phone automatically switches off if the battery voltage is too low. 

 

•

 When not using the battery for a long period, remove it from the phone and store it in a cool dry place.