ZTE Corporation ZTEGS510 Manuale Utente
10
Installing and Removing the SIM Card
1. Make sure that the phone is switched off and the charger
is disconnected from the phone.
2. Turn the phone over and remove the back cover.
3. If the battery is already inside, remove it.
4. Insert the SIM card into the card slot with its metal contacts
3. If the battery is already inside, remove it.
4. Insert the SIM card into the card slot with its metal contacts
facing the phone, as shown in the following picture.
5. Replace the battery first.
6. Replace the back cover.
To remove the SIM card, slide it out of the card slot.
6. Replace the back cover.
To remove the SIM card, slide it out of the card slot.
Powering On/Off
1. Make sure that your SIM card is inserted and the battery
is charged.
2. Press and hold End Key for about 2 seconds to power
on/off the phone. Set the phone language if needed, and
then the phone will automatically search for the network.
then the phone will automatically search for the network.
Notes:
You may need to enter the Personal Identification Number
(PIN) or phone code if you have enabled PIN lock or phone
lock feature. (See Setting up Your Phone — Security Settings.)
You may need to enter the Personal Identification Number
(PIN) or phone code if you have enabled PIN lock or phone
lock feature. (See Setting up Your Phone — Security Settings.)