ZTE Corporation ZTEMF612 Manuale Utente
16
3 Voice
3.1 Making a Call
Before making a call, make sure:
The (U)SIM card is installed.
The telephone cable (RJ11) is connected properly.
The PWR light is on.
The RSSI light is on.
Pick up the handset.
1. Key in the telephone number.
2. You can either press # key on the telephone to send the call, or wait
1. Key in the telephone number.
2. You can either press # key on the telephone to send the call, or wait
4~8 seconds for the call to be connected automatically.
3.Call will be connected.
Note: If there is no RSSI indication, the RF signal is unavailable.
Change the location of the router and make sure nothing is blocking it.
Note: If there is no RSSI indication, the RF signal is unavailable.
Change the location of the router and make sure nothing is blocking it.
3.1.1 Making a Trunk Call
If you are making a trunk call, add the area code as normal.
E.g. 03 9612 3456
3.1.2 Making an International Call
If you are making an international call, key in the international access
code followed by the country code, area code and number.
code followed by the country code, area code and number.
E.g. 00 11 64 12 345678
3.2 Answering a Call
When the phone rings, pick up the handset to answer it. If the