ZTE Corporation ZTET6 Manuale Utente

Pagina di 50
  ZTE T6 User Manual
 
 
Confidential and Proprietary Information of ZTE CORPORATION 17 
 
 
Charge the battery 
Your phone is powered by a rechargeable battery. The battery is not fully charged when first unpacked, 
but there may be enough power to power your phone on. You should use it up completely before charging 
the battery for the first time. Charge the battery with the procedure indicated below. 
  Caution:
 
Charging is only possible within a temperature range of 0  to 45
  Notes: 
 
For  maximum  battery  performance,  it  is  recommended  that  you  completely  charge  the  battery 
before using the phone for  the first time. A new battery’s full performance is achieved  only after 
three complete charge and discharge cycles. 
1. Push down the USB cover. 
2. Insert the charger’s USB adapter into the USB port.   
 
3. Connect the charger to a standard AC wall outlet. 
4. Remove the charger from both the wall outlet and the phone once the charging completed. 
5. Get the rubber cover of the USB charging port back to your phone. 
  Notes:
 
 Make sure that the adapter is inserted into the correct position. Do not force the connector into the 
port. 
 The battery will be fully charged for 3~4 hours. 
 Charging is only possible within a temperature range of 0  to 45. Use the charger provided by 
the original provider. Using unauthorized charger may cause danger and violate the authorization 
and warranty rules of the phone. 
 If  the  phone  is  over-used  in  shortage  of  battery  or  not  used  for  a  long  time,  the  screen  may  not 
display the charge indicator until it is continues charged for 10 to 40 minutes.   
 
(U)SIM card 
You can obtain a (U)SIM card from a mobile phone service provider when you sign on as a subscriber. 
Install the (U)SIM card 
  Notes:
 
 The  charger  and  other  accessories  should  be  disconnected  from  your  phone  before  you  insert  or 
remove the (U)SIM card.