ZTE Corporation ZXG-BTS2 Manuale Utente
Chapter 4 - System Functions
Confidential and Proprietary Information of ZTE CORPORATION 87
Parameter Configuration
It supports the BTS parameter configuration by the BSC.
The parameter configuration flow is shown in Figure 69.
F
I G U R E
6 9
P
A R A M E T E R
C
O N F I G U R A T I O N
F
L O W
CMM
FUC
CHP
CIP
The messages from the BSC are sent to the CMM board through the BIE
board through the LapD link, and then forwarded to application processes
through the message distribution process of the Abis interface of the CMM
software. The CMM configuration process processes the configuration
software. The CMM configuration process processes the configuration
messages and implements the BTS static data configuration by the BSC.
The CMM software distributes the BSC parameters, and through the HDLC,
configures the data to the TRM board FUC software that is managed by the
The CMM software distributes the BSC parameters, and through the HDLC,
configures the data to the TRM board FUC software that is managed by the
CMM software. After receiving the configuration message from the CMM
software, the FUC software configures the board attributes, notifies the
software, the FUC software configures the board attributes, notifies the
CMM software of the successful configuration message at the same time,
and configures the CHP and CIP.
and configures the CHP and CIP.
Alarm and Status Reporting
The ZXG10-BTS (V2.9) supports reporting the alarms and status of the
BTS to the BSC.
The alarm reporting flow is shown in Figure 70.