ZTE Corporation ZXG-BTS2 Manuale Utente
Confidential and Proprietary Information of ZTE CORPORATION 91
C h a p t e r
5
Networking Modes and
System Configurations
System Configurations
This chapter introduces the networking modes, system configurations, and
networking examples of the ZXG10-BTS (V2.9).
Networking Modes
The ZXG10-BTS (V2.9) is connected with the BSC through the Abis
interface and supports these networking modes: Star, chain and tree
interface and supports these networking modes: Star, chain and tree
networking.
1. Star networking mode
The star networking mode of the ZXG10-BTS (V2.9) is shown in Figure
75.
75.
F
I G U R E
7 5
S
T A R
N
E T W O R K I N G
M
O D E O F
Z X G 1 0 - B T S ( V 2 . 9 )
B
S
C
S
C
SITE0
SITE1
SITEn
.
.
.
.
.
Each line represents a bidirectional E1 line. The specific ID DIP switch
at the site should be set based on the actual configuration.
In star networking, n E1 PCM links are led into each SITE directly from
at the site should be set based on the actual configuration.
In star networking, n E1 PCM links are led into each SITE directly from
BSC. The BTS device on each site is end equipment. The networking
mode is simple, accompanied by convenient construction and
mode is simple, accompanied by convenient construction and