ZTE Corporation ZXHNF660V52 Manuale Utente
The power adapter is not correctly connected to the device. Be sure to use the
power adapter supplied with the device.
The LOS indicator is flashing red or solid red after the device is powered
on.
power adapter supplied with the device.
The LOS indicator is flashing red or solid red after the device is powered
on.
�
The optical fiber is not correctly connected to the ONT PON interface.
�
The optical fiber is broken or damaged.
�
If the indicator is solid red or keeps flashing, please contact the service
provider for maintenance.
provider for maintenance.
The PON indicator on the front panel is off or flashing green after the de-
vice is powered on.
vice is powered on.
�
The GPON link is not established.
�
The ONT is not registered.
�
Please contact the service provider for help.
The green LAN indicator on the front panel is off after the device is pow-
ered on.
ered on.
�
The corresponding LAN link is not established.
�
The Ethernet cable is not correctly connected to the LAN interface.
�
The network device connected to the LAN interface is not powered on.
The Phone indicator on the front panel is off after the device is powered
on.
The telephone function is abnormal. Please contact the service provider for
help.
on.
The telephone function is abnormal. Please contact the service provider for
help.
9
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
�
Reorient or relocate the receiving antenna.
�
Increase the separation between the equipment and receiver.
�
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
the receiver is connected.
�
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncon-
trolled environment and it also complies with Part 15 of the FCC RF Rules. This
equipment must be installed and operated in accordance with provided instruc-
tions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-lo-
cated or operating in conjunction with any other antenna or transmitter. End-
trolled environment and it also complies with Part 15 of the FCC RF Rules. This
equipment must be installed and operated in accordance with provided instruc-
tions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-lo-
cated or operating in conjunction with any other antenna or transmitter. End-