ZTE Corporation ZXMBW-RA25 Manuale Utente
ZXMBW RA25 Agile 2.5G Remote Radio Frequency Unit Installation Manual
50
Confidential and Proprietary Information of ZTE CORPORATION
n
In the case the antenna is to be mounted on a roof, move
the antenna and the installation materials to the installation
position manually.
the antenna and the installation materials to the installation
position manually.
F
I G U R E
3 3
A
N T E N N A
H
O I S T I N G
S
C H E M A T I C
D
I A G R A M
1
2
3
1. Lower pulling rope 2. Pulley block 3. Upper pulling rope tied with
knots at the upper/lower ends of the antenna
Directional Antenna Installation
Note
: This section describes the install process as reference for
installation personnel. During the on-site installation process, please
carefully read the installation manual provided with the antenna, and
carry out the construction according to the actual conditions.
1. Initial assembly of the directional antenna fittings
Before fastening the antenna, assemble fastener C onto the
upper/lower ends of the antenna, as shown in Figure 34, and
then connect fasters B and A, to complete the initial
installation of the directional antenna. All accessories must
be installed with spring and plain washers.
upper/lower ends of the antenna, as shown in Figure 34, and
then connect fasters B and A, to complete the initial
installation of the directional antenna. All accessories must
be installed with spring and plain washers.