ZTE Corporation ZXV10P802 Manuale Utente
42
Multiple SIP Accounts and Lines
ZXV10 P802 can support up to two independent SIP accounts. Each account is
capable of independent SIP server, user and NAT settings. Each of the line
buttons is “virtually” mapped to an individual SIP account. The name of each
account is conveniently printed next to its corresponding button. In off-hook
state, select an idle line and the name of the account (as configured in the web
interface) is displayed on the LCD and a dial tone is heard.
capable of independent SIP server, user and NAT settings. Each of the line
buttons is “virtually” mapped to an individual SIP account. The name of each
account is conveniently printed next to its corresponding button. In off-hook
state, select an idle line and the name of the account (as configured in the web
interface) is displayed on the LCD and a dial tone is heard.
For example: Configure ACCOUNT 1 and ACCOUNT 2 with Account Name as
“VoIP 1”, “VoIP 2”, respectively and ensure that they are active and registered.
When LINE1 is pressed, you will hear a dial tone and see “VoIP 1” on the LCD
display; when LINE2 is pressed, you will hear a dial tone and see “VoIP 2” on
the LCD display.
“VoIP 1”, “VoIP 2”, respectively and ensure that they are active and registered.
When LINE1 is pressed, you will hear a dial tone and see “VoIP 1” on the LCD
display; when LINE2 is pressed, you will hear a dial tone and see “VoIP 2” on
the LCD display.
To make a call, select the line you wish to use. The corresponding LINE LED
will light up in green. User can switch lines before dialing any number by
pressing the same LINE button one or more times. If you continue to press a
LINE button, the selected account will circulate among the registered accounts.
will light up in green. User can switch lines before dialing any number by
pressing the same LINE button one or more times. If you continue to press a
LINE button, the selected account will circulate among the registered accounts.
For example: when LINE1 is pressed, the LCD displays “VoIP 1”; If LINE1 is
pressed twice, the LCD displays “VoIP 2” and the subsequent call will be made
through SIP account 2.
pressed twice, the LCD displays “VoIP 2” and the subsequent call will be made
through SIP account 2.
Incoming calls to a specific account will attempt to use its corresponding LINE
if it is not in use. When the “virtually” mapped line is in use, the ZXV10 P802
will flash the next available LINE in red. A line is ACTIVE when it is in use and
the corresponding LED is red.
if it is not in use. When the “virtually” mapped line is in use, the ZXV10 P802
will flash the next available LINE in red. A line is ACTIVE when it is in use and
the corresponding LED is red.
Completing Calls
There are five ways to complete a call:
1.
D
IAL
:
To make a phone call.
1. Take Handset/SPEAKER/Headset off-hook
or press an available LINE key (activates speakerphone)
or press the NEW CALL soft-key