ZTE Corporation ZXV10P802 Manuale Utente
79
Account Ring Tone
There are 4 uniquely defined ring tones:
· One (1) System Ring Tone: when selected, all calls
will ring with system ring tone.
· Three (3) Customer Ring Tones: when selected,
incoming calls from designated account will play
selected ring tone.
· One (1) System Ring Tone: when selected, all calls
will ring with system ring tone.
· Three (3) Customer Ring Tones: when selected,
incoming calls from designated account will play
selected ring tone.
Ring Timeout
Defines how long ring will ring when receiving a call.
Default is 60 seconds.
Default is 60 seconds.
Line-seize Timeout
Defines how long it will take before seizing the line in
Shared Call Appearance group. Default is 15 seconds.
Shared Call Appearance group. Default is 15 seconds.
Send Anonymous
If this parameter is set to “Yes”, the “From” header in
outgoing INVITE message will be set to anonymous,
essentially blocking the Caller ID from displaying.
outgoing INVITE message will be set to anonymous,
essentially blocking the Caller ID from displaying.
Anonymous Call
Rejection
Rejection
Default is “No”. If set to “Yes”, anonymous call will be
rejected.
rejected.
Auto Answer
Default is “No”. If set to “Yes”, ZXV10 P802 will
automatically switch on speaker to answer the
incoming call. Set to Intercom/Paging mode, it will
answer the call based on the SIP info header from the
server.
automatically switch on speaker to answer the
incoming call. Set to Intercom/Paging mode, it will
answer the call based on the SIP info header from the
server.
Allow Auto Answer
by Call-Info
by Call-Info
If the Call-Info header contains answer-after=0, the call
be answered automatically (so called paging mode).
be answered automatically (so called paging mode).
Refer-To Use
Target Contact
Target Contact
Default is “No”. If set to “Yes”, then for Attended
Transfer, the “Refer-To” header uses the transferred
target’s Contact header information.
Transfer, the “Refer-To” header uses the transferred
target’s Contact header information.
Transfer on
Conference Hangup
Conference Hangup
Defines whether or not the call is transferred to the
other party if the initiator of the conference hangs up.
Default setting is set to “No”.
other party if the initiator of the conference hangs up.
Default setting is set to “No”.
Preferred Vocoder
ZXV10 P802 supports up to 7 different Vocoder types