ZTE Corporation ZXV10W300V8 Manuale Utente
ZXV10 W300 Wireless ADSL Router User Manual
14
Confidential and Proprietary Information of ZTE CORPORATION
If Bridge Connection selected, the WAN connection configuration
page is shown as Figure 11.
To create a bridge mode WAN
connection, perform the following operations.
i. Specify the New Connection Name.
ii. Specify the VPI/VCI value (provided by ISP).
iii. Leave the other parameters as default.
iv. Click the Create button.
F
I G U R E
1 1
C
R E A T I N G A
W A N
C
O N N E C T I O N
–
7
Wireless Configuration
Configuring WLAN Basic Parameters
Click Network > WLAN > Basic to open the basic parameter
configuration page, as shown in Figure 12. Set the parameters
according to the descriptions below.
according to the descriptions below.
Enable Wireless RF: Whether to enable wireless RF function.
Mode: There are three available modes.
¾
Mixed (802.11b+802.11g): Support 802.11b and 802.11g
¾
IEEE 802.11b only: Support 802.11b only
¾
IEEE 802.11g only: Support 802.11g only