Kontron Embedded Technology Inc REVO-TPC Manuale Utente
Battery Operations
The right bay battery is the primary battery source and is identified as battery number 1. The left bay battery is the
secondary battery source identified as battery number 2. Using two or more batteries will allow you to swap charged
batteries into the module bays for extended portable operation.
secondary battery source identified as battery number 2. Using two or more batteries will allow you to swap charged
batteries into the module bays for extended portable operation.
Single battery operation
The ReVolution running on a single battery will deplete battery charge until an alarm level is met then trigger the
action set for that alarm. Set the alarm level and action in Power Options in Windows Control Panel.
action set for that alarm. Set the alarm level and action in Power Options in Windows Control Panel.
Stand-by battery operation
When running the ReVolution with two charged batteries, the secondary battery will be depleted first. The primary
battery will power the ReVolution when the secondary battery is empty, keeping the ReVolution running as a stand-by
battery. Replace the depleted secondary battery with a charged battery to resume powering the ReVolution on the
secondary battery.
battery will power the ReVolution when the secondary battery is empty, keeping the ReVolution running as a stand-by
battery. Replace the depleted secondary battery with a charged battery to resume powering the ReVolution on the
secondary battery.
Alternate battery operation
Place a battery in either bay and run the ReVolution until a low battery message is displayed. Place a charged battery
in the remaining open bay to continue operation and remove the discharged battery.
in the remaining open bay to continue operation and remove the discharged battery.
ReVolution User Manual 1.00
02/25/03
35