Kontron Embedded Technology Inc REVOLUTION-V5 Manuale Utente
2
02/18/05
ReVolution User Manual 1.00
Safety Instructions
Please read this section carefully and observe the following instructions – and those on the computer - for your own
safety and correct use of the ReVolution.
safety and correct use of the ReVolution.
Kontron Mobile Computing built and tested the ReVolution computer in accordance with EN60950. In order to
maintain this condition and ensure safe operation, you must observe the instructions and warnings contained here
and elsewhere in this manual.
maintain this condition and ensure safe operation, you must observe the instructions and warnings contained here
and elsewhere in this manual.
Do not operate the ReVolution in areas sensitive to radio
interference, such as airplanes and hospitals.
interference, such as airplanes and hospitals.
There is no
means to shut off the Bluetooth and WLAN radios installed in the system.
T Operate the ReVolution in accordance with the instructions for use.
T Make sure electrical receptacles match the regulations in your area.
T Place cables, especially the power cable, out of traffic areas where people could trip over them.
T Do not put an AC power connection in sockets shared by a number of other power users.
T Do not use an extension cable.
T Plug the power cable into a nearby socket to prevent an accidental disconnection.
T Use only the cables supplied by Kontron.
T Do not place the ReVolution in the proximity of heat sources or in a damp location. Make sure it has adequate
ventilation.
T Connect to ReVolution interfaces: only devices and components that meet the requirements of a SELV circuit
(security low voltage output) in accordance with EN60950.
T Lock or screw down all plugs on the connection cables to the housing.
T You may not safely operate the ReVolution if:
–it has visible damage or
–it no longer functions.
Shut down the computer and secure it against unintentional operation.
–it no longer functions.
Shut down the computer and secure it against unintentional operation.
T Any extensions to the computer must meet legal stipulations and the device specifications.
T Only authorized Kontron technical repair personnel may perform assembly, extensions, new settings, alterations
or repairs while under warranty.
T Only use original accessories approved by Kontron.
Operation of Laser Source Devices
Class 1 laser products typically contain a label similar to the following. Use caution when dealing with such
devices.
The CD-ROM, CD-RW, DVD, DVD/CD-RW Combo modules and others contain a light-emitting diode (classified in
accordance with IEC 825-1:1993: LASER CLASS 1) and must not be opened. When the cover is opened, invisible
laser radiation is emitted. Do not expose yourself to this radiation.
accordance with IEC 825-1:1993: LASER CLASS 1) and must not be opened. When the cover is opened, invisible
laser radiation is emitted. Do not expose yourself to this radiation.