Kontron Embedded Technology Inc REVOLUTION-V5 Manuale Utente
26
02/18/05
ReVolution User Manual 1.00
Inserting Battery into Right Bay
To insert a battery into the right front bay:
x
Open the right bay door.
x
Insert a battery into the right bay sideways, with battery label facing up. A set of the battery contact points facing
away from you and positioned in the front LEFT portion of the battery pack.
away from you and positioned in the front LEFT portion of the battery pack.
x
Align the latch post at the bottom of the battery with the receiving slot on the bottom of the bay.
x
Carefully slide the battery into the bay until it locks into place.
x
Close and lock the door.
The system will notify you when the main power source
has been lost, and the unit is running on battery power.
When the system is running on battery power, the
computer will sustain approximately 3.5 hours of
operating time.
has been lost, and the unit is running on battery power.
When the system is running on battery power, the
computer will sustain approximately 3.5 hours of
operating time.
The system will monitor the presence of external input
voltage and the battery pack voltage. It will begin to
charge whenever it detects a low battery voltage
condition and stop charging when one or both batteries
are fully charged.
voltage and the battery pack voltage. It will begin to
charge whenever it detects a low battery voltage
condition and stop charging when one or both batteries
are fully charged.
The system charges one battery at a time, charging the
left battery fully, then the right battery.
left battery fully, then the right battery.
Charge time with system power off takes up to 3.5 hours
per battery. With system power on, charge time takes up
to 7 hours per battery.
per battery. With system power on, charge time takes up
to 7 hours per battery.
For faster battery charging, Kontron recommends the
optional external battery charger listed in the “Base Unit
and Optional Parts” section of this manual.
optional external battery charger listed in the “Base Unit
and Optional Parts” section of this manual.