Linx Technologies 3F0002RDTX Manuale Utente

 

3

RF Sync. 
 

•  Remove RF Microphone from BaseStation. 

•  SYNC LED on RF Charger BaseStation and 

ACT LED on RF Microphone flash quickly, 
then very rapidly. The COMM LED on the 
RF Microphone will flash, indicating RF 
Microphone <> RF Charger BaseStation RF 
communications, establishing an RF link. 

•  The ACT LED on the RF Microphone now 

flashes very slowly, approximately once 
every three seconds. This is RF Microphone 
Active Standby mode. 

 
 
 
 
 
 
 
 
 
 
Switch-On (activation). 
 

•  Press the activation button on the RF 

Microphone (hold for 0.3s and release). 

•  COMM LED on the RF Microphone and 

SYNC LED on RF Charger BaseStation 
flash, then remain lit. 

•  RF Microphone is now activated and 

transmitting audio. 

•  RF Charger BaseStation is now activated 

and receiving audio. 

 
 
 
Switch-Off (deactivation). 
 

•  Press the activation button on the RF 

Microphone (hold for 0.3s and release). 

•  COMM LED on RF Microphone and SYNC 

LED on RF Charger BaseStation flash. 

•  SYNC LED on RF Charger BaseStation 

remains off. 

•  COMM LED on RF Microphone flashes very slowly, approximately once every three 

seconds. The RF Microphone is now in Active Standby mode. 

 
Power Off. 
 

•  To fully switch off the Charger Base and RF Charger BaseStation, unplug the power from 

the unit. 

•  To fully switch off the RF Microphone, press and hold the activation button for eight (8) 

seconds. All LED’s will flash once, indicating shut down state.