Linx Technologies 3F090009X Manuale Utente
Wi.232FHSS-250-FCC-R
User’s Manual
© 2002-7 Radiotronix Inc, all rights reserved
- 3 -
5/25/2007
1 Description
The Wi.232FHSS-250-FCC-R is a FCC/IC pre-authorized Wi.232FHSS-250-FCC-R module,
containing the requisite circuitry for FCC/IC modular approval. When used in accordance with the
restrictions listed in this document, the OEM product does not need to undergo FCC or Industry Canada
Part 15 / RSS transmitter testing.
containing the requisite circuitry for FCC/IC modular approval. When used in accordance with the
restrictions listed in this document, the OEM product does not need to undergo FCC or Industry Canada
Part 15 / RSS transmitter testing.
For information on the operation of the module, please consult the Wi.232FHSS-250-R™ User’s Manual.
This manual contains information on registers and settings, as well as application information. For
assistance with the Rapid Development Kit (RK-Wi.232FHSS-250-FCC-R), evaluation software, or USB
driver installation, please see the RK-Wi.232FHSS-250-FCC-R user’s manual. Both of these manuals are
available for download from our website (
This manual contains information on registers and settings, as well as application information. For
assistance with the Rapid Development Kit (RK-Wi.232FHSS-250-FCC-R), evaluation software, or USB
driver installation, please see the RK-Wi.232FHSS-250-FCC-R user’s manual. Both of these manuals are
available for download from our website (
http://www.radiotronix.com
). Alternately, they can be obtained
by contacting our inside sales force (sales@radiotronix.com).
2 Usage Guidelines for FCC / IC Compliance
Wi.232FHSS-250-FCC-R modules have been awarded FCC and IC modular approval. That means that
this module, when integrated into your end product, requires no FCC part 15 or IC RSS-210 testing as
long as the following guidelines are met. Failure to meet any of the following guidelines will prevent the
inheritance of the FCC and IC modular certifications.
this module, when integrated into your end product, requires no FCC part 15 or IC RSS-210 testing as
long as the following guidelines are met. Failure to meet any of the following guidelines will prevent the
inheritance of the FCC and IC modular certifications.
2.1 Antenna Selection
In order to maintain compliance with FCC and IC regulations, an antenna with no more than 2.4dBi gain
must be used. This module has been tested with the following antennas:
must be used. This module has been tested with the following antennas:
Radiotronix Part Number
Antenna Type
Antenna Gain
ANT-000-01A
RP ½ Wave Dipole, Swivel Mount
2.4 dBi
ANT-915-06A
RP ½ Wave Dipole
2.15 dBi
An approved antenna must be directly attached to the module’s reverse-polarity SMA connector, or
through an approved shielded coaxial extension cable in the final application to inherit the FCC and IC
modular certifications.
through an approved shielded coaxial extension cable in the final application to inherit the FCC and IC
modular certifications.
2.2 Module Modification
The module must not be physically altered in any way. If any connections are made to the module that
bypass the module pins, socket, antenna connector, or any other module component, the FCC and IC
modular certifications cannot be inherited.
bypass the module pins, socket, antenna connector, or any other module component, the FCC and IC
modular certifications cannot be inherited.
2.3 End Product Labeling Requirements
Pursuant to FCC public notice DA 00-1407, the end product must be labeled on its exterior with the
following verbiage:
following verbiage:
“Contains FCC ID: Q7V-3F090009X”
2.4 Documentation Requirements
Both 20cm exposure and FCC compliance statements must be included in the end product’s user’s
manual. Please see section 5.2 for more details.
manual. Please see section 5.2 for more details.