Marasst Incorporation 03010 Manuale Utente
21
5. Connect the red and white RCA audio connectors to the left and
right audio in ports on the external equipment.
6. Refer to your equipment’s user manual for information on how to
select the proper input signal. For example, a television may need
to be set to “A/V” input.
to be set to “A/V” input.
7. Make sure both the Guardian Angel transmitter and receiver are
powered on (page 12) and that each is set to the same channel (page 16). If the receiver is switched to audio/video mode, video
and audio are played back or recorded on the external device. If the
receiver is set to audio mode, only audio is played back or
recorded.
and audio are played back or recorded on the external device. If the
receiver is set to audio mode, only audio is played back or
recorded.
Yellow RCA video connector
Red RCA audio connector
White RCA audio connector
Equipment input ports
Marasst.book Page 21 Thursday, June 19, 2003 6:05 PM