Linksys HGA7S-WMP54GX Manuale Utente

34

Appendix A: Troubleshooting

This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This 
appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G 
PCI Adapter. Read the description below to solve your problems. If you can't find an answer here, check the 
Linksys website at www.linksys.com.

•

Reinsert the Wireless-G PCI Adapter into your PC’s PCI slot.

•

Right-click on My Computer and select Properties. Select the device manager and click on the Network 
Adapter. You will find the Wireless-G PCI Adapter if it has been installed successfully. If you see the yellow 
exclamation mark, the resources are conflicting. You will see the status of the Wireless-G PCI Adapter. If 
there is a yellow question mark, please check the following:

•

Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt on a PC.) 

•

Make sure that you have inserted the right adapter and installed the proper driver.

If the Wireless-G PCI Adapter does not function after attempting the above steps, remove the adapter and do 
the following:
•

Uninstall the driver software from your PC.

•

Restart your PC and repeat the hardware and software installation as specified in this User Guide.

configuration.
•

Make sure that the PC to which the Wireless-G PCI Adapter is associated is powered on.

•

Make sure that your Wireless-G PCI Adapter is configured on the same channel and with the same 
security options as with the other computers in the Infrastructure configuration.