SendFar Technology Co. Ltd. OAB-04004 Manuale Utente

„

Step 1 Enter the Utility > Administration page, select the Save then

Restart to apply the new configuration settings.

Step 2 Click FINISH to take effect on the previous configuration changes.

Hint: It takes about 10 seconds, to complete the restart process.

„

The Trivial File Transfer Protocol (TFTP) Server allows you to transfer files
across a network. You can download the firmware files for SF-3000
upgrades.

After the TFTP Server is installed, make sure you have the proper TFTP
Server IP address, the proper SF-3000 firmware files, and the TFTP Server
is operational.

„

Step 1 Enter the Utility > Software Upgrade page as shown in the figure

below, and can use TFTP to upgrade SF-3000. Here, user must
specify the TFTP server IP and select which file you want to
upgrade it (Program image, Web image), then click OK button to
start the TFTP upgrade process.

Step 2 If the upgrade process is success, the SF-3000 will apply the new

settings and start rebooting right away.

Hint: You must set up a TFTP Server and this server must contain the

latest new image files.

„

Please refer to 

 that introduces how to use RS-232 console

port.

„

Identify the IP Address assigned to the unit.

Step 1 If the connection is normal, when the SF-3000 is powered up, the

“Current Network Status” will be displayed as shown below.