SendFar Technology Co. Ltd. OAP-04003 Manuale Utente

Pagina di 32
 
 
50
 through using a web browser  
 or telnet program on a LAN 
 attached computer. 
 Net Mask 
 Consists of four sets of digits  
 that help divide a network into  
 sub-networks and simplify 
 routing and data transmission 
No.1:255.255.255.0 
No.2:255.255.255.0 
No.3:255.255.255.0 
No.4:255.255.255.0 
 NAT(PAT) 
 Select the network type for NAT 
 function. 
 OFF <-> ON: NAT enable 
 ON <-> ON: NAT disable 
 OFF <-> OFF: NAT disable 
No.1: OFF 
No.2: OFF 
No.3: ON 
No.4: OFF 
 Bridging 
 Shows the corresponding  
 interface that joins to form a 
 bridge  
No.1: Not Join 
No.2: Not Join
 
No.3: Not Join 
No.4: Not Join 
 ISP Index 
 Select the ISP index given in  
 the ISP pool 
ISP1 
 IPCP 
 Select IP Control Protocol 
 (Static or dynamic) for 
 PPP/PPPoE interface 
Dynamic 
 Idle Time Out (min) 
 Cancel the dial if not connected 
 within this period 
3min 
 Dial Priority 
 Set the dial-up priority of the  
 corresponding interface 
PPPoE: 3 
PPP: 2 
Dial-in 
 Enable or disable the dial-in  
 function of the corresponding  
 interface 
Disable 
 Dial-in Authentication 
 Selects the authentication 
protocol for the corresponding 
 dial-in interface 
None 
Table B-2 
 
 
 
 
51
 
 
 
B-1-3 Telnet/Console (as shown in Table B-3) 
 Parameter 
 Description 
Default Value 
 Maximum User 
 Set the maximum number of  
 the users that can login the AP  
 through Telnet session at the 
 same time 
 Telnet Port 
 The port number for Telnet  
 Program 
23 
 Console Port 
 The communication port that is 
 used to login the AP 
COM1 
 ID Number 
 Index for Telnet users 
 User Name 
 User name for Telnet session 
user1 
 Privilege 
 Select the user’s privilege level 
 for Telnet session 
Unlimited 
 Max. Screen Line 
 Set the maximum number of  
 lines displayed on the screen 
24 
 Show Mode 
 Select the type of display for  
 Telnet session  
 (Command/Menu mode) 
Menu 
 Keyboard Type 
 Select the type of the keyboard 
 for Telnet session 
VT100 
Table B-3 
B-1-4 Telnet/Console (as shown in Table B-4) 
 Parameter 
 Description 
Default Value 
 ISP Name 
 Name of Internet Service  
 Provider 
ISP-1 
 Phone Number 
 The phone number that is used 
 to dial up your ISP 
 Note: The phone number must 
enter direct line phone number 
12345678 
 Username 
 The user name used to login ISP 
user