Controlled Electronic Management Systems Ltd INFOPROX Manuale Utente

InfoProx Entry   

Configuring the Door Control Unit 

Once the site code is entered, the second stage of the door control unit setup 
must be completed so that the unit conforms to a user’s needs. This part of the 
setup is accessed through the Diagnostic screen.  

 

1. 

Press 

Ù to display the second screen of the Administration menu.  

2. 

Press 4.  

The following screen appears. 

 

Diagnostic Tests 
[S/N xxxx] 

This screen is automatically followed by the Configure Rdr ? screen:  

 

Configure Rdr ? 
No 

Ù

   Yes # 

The Configure Reader screen is the doorway to unit setup, which 
requires user interaction. All other screens under the Diagnostic screen 
category are read-only and do not require user interaction. 

 

 

If you do not press Yes-# within five seconds or if 
you press 

Ù, the read-only diagnostic screens 

display in sequence. Once this sequence begins, you 
can stop it only by unplugging the unit.  The 
diagnostic sequence will return you to the 
Administration menu when completed. Each 
diagnostic screen will display for the default time of 
five seconds. 

 

3. 

Press # to enter the unit setup mode.  

The following prompt appears: 

 

RDR Setup Option 
# to continue 

4. 

Press # to continue with unit setup. 

The following series of reader unit setup screens appears: Contrast, 
Door Mode, Keypad Enable/Disable, Exit Configuration, and Relay Idle 
State.