Controlled Electronic Management Systems Ltd S3040RH Manuale Utente
21
Chapter 4
S3040 Software Configuration
Once the connection (wired or wireless) between the S3040 reader and the AC2000 server has been
setup, the S3040 is configured for use in AC2000 by performing the following actions:
setup, the S3040 is configured for use in AC2000 by performing the following actions:
• Adding the device in AC2000 (Devices)
• Enabling the Portable Subsystem on the CDC
• Assigning the server IP address to the S3040
• Downloading the databases from AC2000
• Assigning the device address to the S3040
• Configuring the reader address as a portable Muster device in AC2000 (if applicable)
• Configuring random checks (if applicable)
4.1 Adding the Device in AC2000 (Devices)
The reader must be added to AC2000 using the Devices application:
1.
From the Floatbar, select Device Configuration | Devices.
2.
Expand the Controller DF – V3 Portables list.
3.
Right-click the appropriate Device Group and select Add Device.
4.
Select 3040 Portable from the Device Type dropdown list.
5.
Enter a meaningful device location (e.g. Warehouse, Muster Point 1)) and click Add.
6.
Click Save.