Promethean 006 Manuale Utente
ACTIVote User Guide
20
The term 'adhoc' is used to represent 'on the spur of the moment' questions.
For example you may think of a question whilst half way through a
presentation. At this point, you could either ask the question to your audience
or write it on a Flipchart Page. The system has been designed to easily
presentation. At this point, you could either ask the question to your audience
or write it on a Flipchart Page. The system has been designed to easily
accommodate the asking of such adhoc questions.
If you require feedback on how individual users voted you will need to switch
to Named mode.
Procedure:
1. Click on Menu > ACTIVote > Session.
Note: If you are running ACTIVprimary, first click on the Teacher Tools
Menu button so you can access Menu > ACTIVote > Session.
You will be presented with the ACTIVote Session Program:
2. Click on Named Mode
Your current users should be
listed since you were asked at
listed since you were asked at
the beginning of this section to
register users. If your current
register users. If your current
users are not listed then refer to
the section on Allocating
the section on Allocating
Devices.
3. Click the OK button.
4. Turn to a new Flipchart
Page then either ask your
adhoc question or write
your adhoc question on
adhoc question or write
your adhoc question on
the current Flipchart Page
using the Pen Tool.
using the Pen Tool.
5. When ready to accept the
response tell your users
to observe the ACTIV
to observe the ACTIV
board and click once on
the ACTIVote tool button.
the ACTIVote tool button.
The timeout bar will appear at the top of the screen.