Promethean 007 Manuale Utente
proACTIV board User Guide
5
proACTIV board Installation Options
Note: To avoid interference with the proACTIV board, we recommend
that the PSU is located at least 30cm away from the proACTIV
board.
board.
The wall mounting option allows maximum flexibility for the many types of
walls found in building construction. If you feel that none of the suggested
mounting instructions suit your situation, consult the building plans or a
mounting instructions suit your situation, consult the building plans or a
reliable contractor for further assistance with your installation.
Wall Mounting
Parts supplied:
• Wall Mount Accessory Kit
• Wall/Stand Mount Leaflet TP1443
Plugs and screws are not supplied for fixing the brackets as
these can vary dramatically dependent upon the nature of the
wall. You must use the appropriate fixing for your type of wall.
wall. You must use the appropriate fixing for your type of wall.
Wall Mounting Procedure
1. Determine a suitable position for your proACTIV board
Ideally, this should be a flat and solid wall. Fixing to a wall other than a
flat wall, may require the use of battens or our alternative fixing
brackets.
brackets.
Determine the presence and location of all electrical wiring
and pipes before fixing the brackets.
and pipes before fixing the brackets.
Wires and pipes may be embedded within the wall. Use a proximity detector to
check the location of these if necessary.
Ensure the brackets will not be fixed within 150mm of any
electrical wiring or pipes.
2. Measure up
Mark the wall with a horizontal line at 950mm from the floor, then mark
the position of the bracket holes according to the dimensions given in
the TP1443 Installation Leaflet.
the TP1443 Installation Leaflet.