Redline Communications Inc. AN80IB Manuale Utente

 

 

User

 

 

AN-80i

 

Manual

 

 

70-00072-01-06a 

 

Page 77 of 96 

June 1, 2008 

 

Use the snmptrap command to configure the SNMP trap message reporting. 

√

 

√ 

add: add a new snmp trap to the snmp trap table. The index value is assigned 
automatically. Up to eight settings can be entered. 
 

snmptrap add <ipaddr> <port> <community> <Enter> 

 

change: Modify the specified snmp setting. 
 

snmptrap change <idx> [-p <port>] [-i <ip_add>] [-c <community] <Ent> 

 

 

del: Delete the specified snmp setting.  
 

snmptrap del <idx> <Enter> 

 

 

print: List all SNMP trap settings. 
   snmptrap print <Enter> 

 

 

Use the test command to load the current edited (but not permanently saved) 
configuration settings.  

√ 

√ 

config - AN-80i configuration settings 
 test 

config 

<Enter> 

 

The AN-80i will operate with these settings for a period of five minutes. During the 'test' 
period, you may click the Save button at any time to save this configuration permanently 
(also terminating the five minute timer). If the Save button is not selected, the previous 
saved settings are reloaded. 

Use the upgrade command to upload a new software binary file to the AN-80i. 

√ 

√ 

 

 

ipaddr: Enter the IP address of the TFTP server. 
filename: Enter the name of the binary file to be uploaded to the AN-80i. 
 upgrade 

<ipaddr> 

<filename> <Enter> 

You must specify the TFTP server address and the full name of the binary file 

(including .bin extension). The AN-80i software binary file must be located in 
the default directory of the TFTP server.