Redline Communications Inc. AN80IB Manuale Utente
User
AN-80i
Manual
70-00072-01-06a
Proprietary Redline Communications © 2008
Page 91 of 96
June 1, 2008
4.94 - 4.99 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 32 dBi. Antennas not included in this list or having a gain greater than
32 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer. The following table lists
FCC and IC certified antennas:
maximum gain of 32 dBi. Antennas not included in this list or having a gain greater than
32 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer. The following table lists
FCC and IC certified antennas:
Table 50: Spec. - FCC & IC Antennas: 4.94 - 4.99 GHz Operation
GUI Settings
Tx Peak Conducted
Power (dBm)
Channel Size (MHz)
Channel Size (MHz)
Redline Part
Number
Gain
(dBi)
(dBi)
Description App.
10 20 40* 10 20 40*
48-00065-00 15
120 deg., .9-5.9 GHz,
sector flat panel
sector flat panel
PMP
18 20 N/A 42 43 N/A
48-00066-00 16.6 90 deg., 4.9-5.9 GHz,
sector flat panel
PMP
18 20 N/A 43 44 N/A
48-00067-00 17.5 62 deg., 4.9-5.9 GHz,
sector flat panel
PMP
18 20 N/A 44 45 N/A
48-00063-00
29
6 deg., 4.900-5.875 GHz,
2 ft parabolic
2 ft parabolic
PMP
15 19 N/A 53 57 N/A
48-00064-00
32
4 deg., 4.900-5.875 GHz,
3 ft parabolic
3 ft parabolic
PMP
13 16 19 54 58 60
* Industry Canada (IC) only -- FCC regulations do not allow use of 40 MHz
channels.