Airaya Corp GRID-3X3-PS Manuale Utente

Airaya

 

- 13 - 

Airaya

  

Proven, Fast and Affordable Outdoor Wireless Bridges

 

 
Before installing the WirelessGRID-300 bridge, be sure you have the 
following items on-hand: 
 

 An AC power outlet (100 to 240 V, 50 to 60 Hz) to supply power to 

the indoor injector units on both sides of the wireless link 

 An outdoor unit mast with a 1 to 4 inch (25.4 to 101.6 mm) 

diameter 

 An available RJ-45 (UTP) port on a 1000/100 Mbps Ethernet switch 

or router 

 Web browser or telnet (CLI) application for software configuration 

 
The WirelessGRID-300 bridge has been designed to withstand normal 
handling procedures, but reasonable precautions should be taken during 

installation, particularly with regard to static discharge.   
 

• 

Make sure that you are adequately grounded by touching the bare 
metal surface on the back of a computer or networking device 

before installing the indoor and outdoor units. 

• 

Avoid moving around the work area in order to eliminate static 
charge buildup. 

• 

If possible, do not work on a carpeted area.