Broadcom Corporation BRCM1005-D Manuale Utente
Reinstalling Sof tware
143
FILE LOCATION: S:\SYSTEMS\Pebble\UG\A00\English\drivers.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 1 / 2 9 / 0 3 – F O R P R O O F O N LY
6
Click the Install button (if present) to begin installing the driver or
utility. At the welcome screen, follow the screen prompts to complete
the installation.
If no Install button is present, automatic installation is not an option.
If no Install button is present, automatic installation is not an option.
For installation instructions, either see the appropriate instructions in
the following subsections, or click Extract, follow the extracting
instructions, and read the readme file.
If instructed to navigate to the driver files, click the CD directory on
If instructed to navigate to the driver files, click the CD directory on
the driver information window to display the files associated with that
driver.
Manually Reinstalling Drivers for Windows XP
NOTE: If you are
reinstalling an infrared-
sensor driver, you must
first enable the infrared
sensor in the system setup
program before
continuing with the driver
installation.
sensor driver, you must
first enable the infrared
sensor in the system setup
program before
continuing with the driver
installation.
1
After extracting the driver files to your hard drive as described
previously, click the Start button, point to Settings, and then click
Control Panel.
2
Click the Start button and right-click My Computer.
3
Click Properties.
4
Click the Hardware tab and click Device Manager.
5
Double-click the type of device for which you are installing the driver
(for example, Modems or Infrared devices).
6
Double-click the name of the device for which you are installing the
driver.
7
Click the Driver tab and click Update Driver.
8
Select Install from a list or specific location (Advanced) and click
Next.
9
Click Browse, and browse to the location to which you previously
extracted the driver files.
10
When the name of the appropriate driver appears, click Next.
11
Click Finish and restart your computer.