PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 117
x
Idle-Timeout = 600
x
Acct-Interim-Interval = 60
x
WISPr-Bandwidth-Max-Up = 256000
x
WISPr-Bandwidth-Max-Down = 512000
Upon successful authentication,
x
User will be authenticated for 7200 seconds (2 Hours), upload
bandwidth 256kbps and download bandwidth 512kbps.
bandwidth 256kbps and download bandwidth 512kbps.
x
HotSpot will send accounting requests to radius every 60 seconds.
10.4.
HotSpot Configuration Example
Assume that the user’s system is equipped with two Ethernet interfaces
and one wireless interface.
and one wireless interface.
Figure 115. Network Topology – Example
The user is connected to the internet via a router with public IP w.x.y.z.
His/her private IP subnet is 192.168.1.0/24. The router masquerades
private IPs to its public IP.
His/her private IP subnet is 192.168.1.0/24. The router masquerades
private IPs to its public IP.
The user must authorize users connected to both HotSpots’ Ethernet
interface eth1 and wireless interfaces ath0. This is accomplished by
configuring MicroRed to act as a HotSpot and authenticate users
connected to those interfaces (HotSpot LAN Interfaces).
interface eth1 and wireless interfaces ath0. This is accomplished by
configuring MicroRed to act as a HotSpot and authenticate users
connected to those interfaces (HotSpot LAN Interfaces).
The authentication is assumed to be handled by the user’s local Radius
Server (IP 192.168.1.00).
Server (IP 192.168.1.00).
MicroRed HotSpot’s WAN Interface in that case is eth0, the one
connected to the router (and Internet).
connected to the router (and Internet).