PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 13
Save Configuration
The
The
Save Configuration menu option allows you to permanently save
configuration for the current node.
Note: After the base station is configured, the configuration parameters are stored in RAM
(volatile memory). If the base station is powered down the configuration will be lost unless
you save configuration to the base station’s permanent memory.
(volatile memory). If the base station is powered down the configuration will be lost unless
you save configuration to the base station’s permanent memory.
Backup
The Back Up menu option allows you to back up and restore the configuration
settings for the selected node.
The Back Up menu option allows you to back up and restore the configuration
settings for the selected node.
FW Upgrade
The FW Upgrade menu option allows you to access the Select dialog box, from
which you can select the firmware image file to be loaded into the node.
The FW Upgrade menu option allows you to access the Select dialog box, from
which you can select the firmware image file to be loaded into the node.
Reboot
The Reboot menu option allows you to reboot the node.
The Reboot menu option allows you to reboot the node.
Current Throughput
The Current Throughput menu option allows you to display a real-time
graphical display of transmit and receive traffic of the network interface.
The Current Throughput menu option allows you to display a real-time
graphical display of transmit and receive traffic of the network interface.
WISP Easy Wizard (WEW)
The WISP Easy Wizard (WEW) menu option allows you to start a wizard that
provides an easy and convenient way to install and configure wireless nodes (See
Chapter 14 for details)
The WISP Easy Wizard (WEW) menu option allows you to start a wizard that
provides an easy and convenient way to install and configure wireless nodes (See
Chapter 14 for details)
Remove
The Remove menu option allows you to remove the currently selected node
from the Topology Map and Registered Node List.
The Remove menu option allows you to remove the currently selected node
from the Topology Map and Registered Node List.
2.2.
Getting Started with MNMS
Starting from the menus and windows mentioned above, you can auto-discover
and insert new nodes, display maps and graphics of you wireless network, save
and load profiles and access multi-tabbed windows used for advanced
configuration of nodes.
and insert new nodes, display maps and graphics of you wireless network, save
and load profiles and access multi-tabbed windows used for advanced
configuration of nodes.
2.2.1.
Auto-Discovering Nodes
Discovery Manager allows you to discover nodes and insert them into the
Topology Map. A custom polling protocol is used to detect MicroRed nodes in
the specified subnet. Discovered nodes are displayed in a tabular format.
Topology Map. A custom polling protocol is used to detect MicroRed nodes in
the specified subnet. Discovered nodes are displayed in a tabular format.
To use Discovery Manager:
x
In the Tools menu, select Discovery Manager. The Auto Discovery
dialog box appears.
dialog box appears.