PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 34
4.1.1.
Adding a New Routing Table
To crate a new routing table that will be integrated in the multiple routing table
system
system
1.
Click the Table Commands
button.
The
Insert New Routing
Table dialog appears.
2.
Type the name into the Routing Table box, and then click Submit. The
table name is stored in the drop down list for future use.
table name is stored in the drop down list for future use.
4.1.2.
Remove an Existing Routing Table
To delete an existing routing table
1.
1.
Select the table name from the Main drop down list.
2.
Click the Table Commands
button.
CAUTION: The user has to be careful not to delete the main routing table, as this action
can lead to connectivity problems.
can lead to connectivity problems.
4.1.3.
Adding Static Routing Entries
To add a new static route
1.
1.
Select the Routes tab
2.
Click the Entries Commands
button.
The
Insert New Route
dialog box appears.
Figure 33. Insert New Route
In the above example all the traffic with destination addresses that belong to subnet
192.168.2.0/ 24 will be forwarded via interface ath0.
192.168.2.0/ 24 will be forwarded via interface ath0.
3.
In the Destination boxes, type the destination network or destination host
address.
address.
4.
In the Subnet boxes, type the netmask for the destination net.
(255.255.255.255 for a host destination and 0.0.0.0 for the default route)
(255.255.255.255 for a host destination and 0.0.0.0 for the default route)
5.
In the Default Gateway boxes, type the gateway address (if required).
6.
In the Preferred Source boxes, type the preferred source address for
communicating to that destination.
communicating to that destination.
7.
In the Distance box, type the distance to the target, usually counted in
hops. (This field is not used by recent kernels, but may be needed by routing
daemons.)
hops. (This field is not used by recent kernels, but may be needed by routing
daemons.)
8.
In the Interface drop down list, select the interface to which packets for this
route will be sent.
route will be sent.