PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 71
interfaces must acquire their IP addresses from the same server a bridge should
be created, and those interfaces should be added under that bridge. Then, select
that bridge as the DHCP server interface.
be created, and those interfaces should be added under that bridge. Then, select
that bridge as the DHCP server interface.
NOTE: You cannot select an interface which is under a bridge as the DHCP server
interface. Additionally the DHCP server interface should have already been configured with
a valid IP address and subnet mask. Multiple DHCP servers on different interfaces are
allowed.
interface. Additionally the DHCP server interface should have already been configured with
a valid IP address and subnet mask. Multiple DHCP servers on different interfaces are
allowed.
7.1.1.
Setting DHCP Server Fields
To configure DHCP server settings, select the Server option button and select
the Active check box. The Server tab becomes available. After completing the
required fields, click the Submit button. This uploads the configuration to the
node without starting the server.
the Active check box. The Server tab becomes available. After completing the
required fields, click the Submit button. This uploads the configuration to the
node without starting the server.
Start IP and End IP
Type the appropriate IP addresses into the Start IP and End IP fields. These
are the upper and lower limits for the DHCP server address pool.
Type the appropriate IP addresses into the Start IP and End IP fields. These
are the upper and lower limits for the DHCP server address pool.
Broadcast
Type the appropriate IP address into the Broadcast field. This field contains the
IP address clients will use. Broadcast IP should be one of the addresses the
Subnet Mask permits.
Type the appropriate IP address into the Broadcast field. This field contains the
IP address clients will use. Broadcast IP should be one of the addresses the
Subnet Mask permits.
Subnet Mask
Type the appropriate IP address into the Subnet Mask field. This is the subnet
mask clients will use.
Type the appropriate IP address into the Subnet Mask field. This is the subnet
mask clients will use.
Domain
Type the Domain name (if any) that will be allocated to clients into this text
box.
Type the Domain name (if any) that will be allocated to clients into this text
box.
Time Parameters
For each of the following fields, type the appropriate value into the box.
For each of the following fields, type the appropriate value into the box.
Lease
The Lease field contains the number of seconds an allocated IP is valid. After
expiration the client has to renegotiate for getting a new IP (which is usually the
same). The expiration time that the client adopts depends on the operating
system running on the client and the DHCP client configuration.
The Lease field contains the number of seconds an allocated IP is valid. After
expiration the client has to renegotiate for getting a new IP (which is usually the
same). The expiration time that the client adopts depends on the operating
system running on the client and the DHCP client configuration.
Decline
The Decline field contains the number of seconds that an IP will be reserved
(leased) for if a DHCP decline message is received.
The Decline field contains the number of seconds that an IP will be reserved
(leased) for if a DHCP decline message is received.
Min Lease
The Min Lease field contains the minimum number of seconds. If a lease to be
given is below this value (sec), the full lease time is used instead.
The Min Lease field contains the minimum number of seconds. If a lease to be
given is below this value (sec), the full lease time is used instead.
Conflict
The Conflict field contains the amount of time (sec) that an IP address will be
reserved (leased) if an ARP conflict (two clients with the same IP address)
occurs.
The Conflict field contains the amount of time (sec) that an IP address will be
reserved (leased) if an ARP conflict (two clients with the same IP address)
occurs.