PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 78
To configure this field identify the PPPoE server by its IP address and type the
address into the Remote IP field, OR determine its domain name and type it
into the Remote Domain field. Then type a time period (seconds) into the
Demand Time field. If a PPPoE connection remains idle for this period, the
connection closes until you try to use it again (probably from a PC behind the
router).
address into the Remote IP field, OR determine its domain name and type it
into the Remote Domain field. Then type a time period (seconds) into the
Demand Time field. If a PPPoE connection remains idle for this period, the
connection closes until you try to use it again (probably from a PC behind the
router).
Figure 75. PPPoE – Enable on Demand Settings
Current Status
When you click the Refresh button the Current Status field displays information
on the current connection (whether there is a connection or the reason for an
unsuccessful attempt to connect).
When you click the Refresh button the Current Status field displays information
on the current connection (whether there is a connection or the reason for an
unsuccessful attempt to connect).
8.2.
Configuring a PPTP Client
The PPTP client application is used to create PPTP connections with PPTP servers
mainly used by Internet Service Providers.
mainly used by Internet Service Providers.
Figure 76. WAN – PPTP Settings
To configure a PPTP Client, select the interface from the interface tree. Its
background turns blue. This interface must be pre-configured with a valid IP
address and subnet mask from the PPTP server subnet or it should be able to
“see” PPTP server in some way (e.g. through default gateway).
background turns blue. This interface must be pre-configured with a valid IP
address and subnet mask from the PPTP server subnet or it should be able to
“see” PPTP server in some way (e.g. through default gateway).
To view the full PPTP tab, select the PPTP option button and select the Active
check box. The PPTP tab appears.
After completing the required fields, click Submit.
check box. The PPTP tab appears.
After completing the required fields, click Submit.