PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 82
Bear in mind, that you can't assign more than one policy per interface flow;
as well as, the same policy to both flows of the same interface. The way
that Classes, Policies and Interfaces are interrelated is depicted in picture 79.
as well as, the same policy to both flows of the same interface. The way
that Classes, Policies and Interfaces are interrelated is depicted in picture 79.
Figure 79. Classes, Policies and Interfaces
Associations are carried out by drag & dropping one to item on other.
9.2.
Differentiating network traffic
The network traffic can be categorized by almost any combination of the
following properties.
following properties.
Inbound/ Outbound Interface
e.g. eth0 in ath0 out
Source/ Destination IP/ subnet
e.g. 192.168.2.0/ 24, 172.16.1.1/ 32
Source/ Destination IP Port Range
e.g. 0 – 1024, 520
Source/ Destination MAC
e.g. 01:02:03:04:05:06
Protocol
e.g. IP, TCP, UDP, ICMP, ......
Application
e.g. P2P traffic, etc
Negations of most of the afore
mentioned
mentioned
e.g. !192.168.1.1/ 32
These parameters constitute the MATCH part of a class. The GUI panel
responsible for these options is depicted at picture 80.
responsible for these options is depicted at picture 80.